Viewing A List Of Connections; Adding A Connection - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
• Section 5.28.6.3, "Configuring Dead Peer Detection"
• Section 5.28.6.4, "Deleting a Connection"
Section 5.28.6.1

Viewing a List of Connections

To view a list of connections configured for a VPN, navigate to tunnel » ipsec » connection. If connections have
been configured, the Connection table appears.
Figure 725: Connection Table
If no connections have been configured, add connections as needed. For more information, refer to
Section 5.28.6.2, "Adding a
Section 5.28.6.2

Adding a Connection

To add a new connection for a VPN, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to tunnel » ipsec » connection and click <Add connection>. The Key Settings form appears.
2.
Figure 726: Key Settings Form
1. Connection Name Box
3. Configure the following parameter(s) as required:
Parameter
Connection Name
Viewing a List of Connections
Connection".
1
2. Add Button
Description
Synopsis: default,
Chapter 5
Setup and Configuration
2
621