1.13.7 Welding Conditions Group Output Function
1.13.7.1 Operation Flow Chart
1.13.7.2 Procedure for Assigning the Group Output Signal
1
Spot Welding Application Using a Motor Gun
1.13 Other Functions Using a Motor Gun
With the welding conditions group output function, a group signal is output
to the welder during welding.
The following shows the operation flow chart for the welding conditions
group output function.
The following describes how to assign the signal number for group output
when executing the SVSPOT/SVSPOTMOV instruction.
1. Select {SPOT WELDING} on the {Main Menu}.
2. Select {WELDER IF}.
1-160
Start
Assign the universal signal
for the group output
Set the group output tag
End
170 of 198