Setting Force Condition File - YASKAWA DX200 Instructions Manual
Options for motofit function engineering support tool
Hide thumbs
Also See for DX200:
- Maintenance manual (1166 pages) ,
- Instructions manual (552 pages) ,
- Operator's manual (120 pages)
Table of Contents
Advertisement
HW1481731
3.3.2.2 Setting Force Condition File
3
Operation Procedure
3.3
Operation for Creating Fitting JOB
1. Operate the system according to the instruction on the Guidance
Menu. On the Guidance Menu, pages can be switched by the {Back} /
{Next} buttons. Check the display on the Guidance Menu, execute
necessary operations, and click the {Next} button to advance to the
next operation.
Clicking the {Save} button enables to save the current setting. Clicking
the {Load} button enables to use the data previously saved. For
details, refer to chapter 6.4 "Backup of Teach Data" . To end the
operation, click the {End} button.
2. Select the force condition file No. to use (from 1 to 24).
3-8
HW1481731
25/104
Hide quick links:
Advertisement
Table of Contents
