Registering Reserved Start I/O Signal - YASKAWA DX100 Operator's Manual

155507-1CD
DX100

4.5.1.2 Registering Reserved Start I/O Signal

4 Playback
4.5 Playback with Reserved Start
Register the start I/O signal as a preparation to perform the start operation
from the station.
This operation can be done only when the operation mode
is the teach mode and the security mode is the
NOTE
management mode, and only when the setting of
"RESERVED START JOB CHANGE" is "PERMIT" in the
OPERATING CONDITION window.
1. Select {SETUP} under the main menu.
2. Select {RES. START(CNCT)}.
– The RESERVED START (CNCT) window appears.
3. Select "START IN" or "START OUT" for each station.
– The number can now be entered.
4-26
215 of 554
RE-CSO-A037