Show Ipv6 Ospf Interface - Dell Z9500 Command Reference Manual

show ipv6 ospf interface

View OSPFv3 interface information.
Z9500
Syntax
show ipv6 ospf [process-number] [vrf vrf-name] [interface]
Parameters
process-
number
vrf vrf-name
interface
Defaults none
Command
EXEC
Modes
Command
Version
History
9.2(1.0)
9.2.(0.0)
9.1.(0.0)
8.3.19.0
7.8.1.0
7.4.1.0
Usage
If you enable BFD at the global level, show ipv6 ospf interface shows the BFD
Information
provisioning.
Open Shortest Path First (OSPFv2 and OSPFv3)
Enter the OSPF process number.
(OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to display neighbors corresponding to that VRF.
NOTE: If you do not specify this option, neighbors
corresponding to the default VRF are displayed.
(OPTIONAL) Enter one of the following keywords and slot/
port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Description
Introduced on the Z9500.
Added support for showing BFD status on the S4820T,
S4810, and Z9000.
Added support for OSPFv3 on the S4810 and Z9000.
Introduced on the S4820T.
Added support for the C-Series.
Introduced on the E-Series.
1363