Show Ipv6 Ospf Interface - Dell PowerConnect 6224 Command Line Interface Manual

Example
The following example displays the number of each type of LSA in the
database and the total number of LSAs in the database.
console#show ipv6 ospf database database-summary
OSPF Router with ID (0.0.0.2)
Router database summary
Router......................................... 0
Network........................................ 0
Inter-area Prefix.............................. 0
Inter-area Router.............................. 0
Type-7 Ext..................................... 0
Link........................................... 0
Intra-area Prefix.............................. 0
Link Unknown................................... 0
Area Unknown................................... 0
AS Unknown..................................... 0
Type-5 Ext..................................... 0
Self-Originated Type-5 Ext..................... 0
Total.......................................... 0

show ipv6 ospf interface

Use the show ipv6 ospf interface command in Privileged EXEC mode to
display the information for the IFO object or virtual interface tables.
Syntax
vlan-id tunnel-id
show ipv6 ospf interface {vlan | tunnel | loopback
loopback-id
}
vlan-id — Valid VLAN ID.
•
981
OSPFv3 Commands