Show Ipv6 Ospf Interface - Dell Networking 2024 Reference Manual

Command Mode
User EXEC, Privileged EXEC mode, Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the number of each type of LSA in the
database and the total number of LSAs in the database.
console#show ipv6 ospf database database-summary
OSPF Router with ID (0.0.0.2)
Router database summary
Router......................................... 0
Network........................................ 0
Inter-area Prefix.............................. 0
Inter-area Router.............................. 0
Type-7 Ext..................................... 0
Link........................................... 0
Intra-area Prefix.............................. 0
Link Unknown................................... 0
Area Unknown................................... 0
AS Unknown..................................... 0
Type-5 Ext..................................... 0
Self-Originated Type-5 Ext..................... 0
Total.......................................... 0

show ipv6 ospf interface

Use the show ipv6 ospf interface command in Privileged EXEC mode to
display the information for the IFO object or virtual interface tables.
Syntax
show ipv6 ospf interface [
interface-type —The interface type, VLAN, tunnel or loopback
•
interface-number —The valid interface number, a valid VLAN ID, tunnel
•
identifier (Range: 0–7) or loopback identifier (Range: 0–7).
interface-type interface-number
]
OSPFv3 Commands
1323