Rep 10.23 Stripper Guide Latch Cam Shaft - Xerox ColorQube 9303 Series Service Manual

6. Remove the upper baffle, Figure 2.
1
Remove 2 screws then
remove the baffle.
Figure 2 Remove upper baffle
Replacement
1. Replacement is the reverse of the removal procedure.
2. If the upper baffle is cleaned, or a new upper baffle is installed, reset the upper JL baffle
count to zero. Refer to dC135 CRU / HFSI Status.
Repairs/Adjustments
REP 10.22, REP 10.23

REP 10.23 Stripper Guide Latch Cam Shaft

Parts List on PL 10.10
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. The stripper blade is very sharp and can cause injury.
1. Open the front door.
2. Remove the inner cover,
3. Unlock and fully open the stripper gate,
4. Remove the exit paper path,
5. Remove the M4 motor and gearbox,
February 2013
4-96
WARNING
GP 14. Disconnect the power cord
WARNING
PL 81.11 Item 2.
GP 31.
REP 10.20.
REP 10.8.
ColorQube® 9303 Family