Sample Set - Xerox WorkCentre 6655i/X User Manual

Printing
Releasing a Secure Print
At the control panel, press the Job Status button.
1.
Touch Held Print Jobs or Secure Print Jobs, then select a folder. For details, see
2.
page 91.
Use the keypad to enter the passcode that you assigned to the print job, then touch OK.
3.
Touch the corresponding print job in the list, then touch Print.
4.
Deleting a Secure Print
1. At the control panel, press the Job Status button.
2. Touch Held Print Jobs or Secure Print Jobs, then select a folder. For details, see
page 91.
Use the keypad to enter the passcode that you assigned to the print job, then touch OK.
3.
Touch the corresponding print job in the list, then touch Delete.
4.

Sample Set

The Sample Set job type allows you to print a sample copy of a multiple-copy job and hold the
remaining copies at the printer. After you review the sample copy, you can select the job name from the
printer control panel to print the additional copies.
Sending a Sample Set Print Job
1. On the Printing Options tab, from the Job Type list, select Sample Set.
2. Verify that the paper is the correct size, type, and weight. If not, change the paper settings.
3. Select an option for 2-sided printing.
4. Select a print-quality mode.
5. Select another tab or click OK.
6. To send the job to the printer, in the Print window, select the number of copies to print, then click
OK or Print.
A sample copy prints immediately. The sample copy is not counted as part of the print job.
7. After reviewing the copy, use the printer control panel to print or delete the remaining copies.
Note: You can use Sample Set as a part of the Earth Smart settings. In Earth Smart settings, set
Sample Set as your default Job Type.
8. To print the job, select it from the job list on the printer control panel.
9. Press OK.
®
92 Xerox WorkCentre
User Guide
®
6655/6655i Color Multifunction Printer
Secure Print on
Secure Print on