Rep 10.3 Mea Unit - Cover Pa Exit Assembly - Xerox WorkCentre M20 Service Manual

REP 10.3 MEA Unit - Cover PA Exit Assembly

Parts List on PL 4.25
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
CAUTION
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1. Remove the ELA HOU - scanner assembly, perform REP 14.1 steps 1 through 7.
2. Remove the MEA unit cover PA exit assembly, Figure 1.
Figure 1 MEA unit - cover PA exit assembly removal
Repairs and Adjustments
REP 10.3
Replacement
Replacement is the reverse of the removal procedure.
1
Remove 2 screws, then the
MEA unit - cover PA exit
assembly.
December 2006
4-52 WorkCentre M20, 4118, FaxCentre 2218 Family