Table of Contents
Advertisement
4.6.5.b.
Scheduling Method
On the Quality of Service Configuration Menu, pressing "C" opens the Scheduling
Method screen, as shown in Fig. 4-51. On this screen, you can configure the sched-
uling method settings.
PN28168 Local Management System
Quality of Service Configuration -> Scheduling Method
Scheduling Method: Strict
Traffic Class
-------------
0
1
2
3
-------------------------------- <COMMAND> -----------------------------------
[S]et Scheduling Method
Set Traffic Class-Weight [M]apping
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Scheduling Method:
Traffic Class
Weight
Available commands are listed below.
S
Select the scheduling method of the QoS function.
Press "S" to change the command prompt to "Select scheduling method (S/W)>." Enter "S"
to use Strict Priority Queueing or "W" to use Weighted Round Robin.
M Set the weight to priority (Traffic Class).
1. Press "M" to change the command prompt to "Enter traffic class>." Enter a Traffic Class
(0 to 3).
2. Then, the command prompt changes to "Enter weight for traffic class #>." Enter weight
(1 to 127).
Q
Return to the parent menu.
Weight
------
1
2
3
4
Fig. 4-51 Scheduling Method
Displays the scheduling method of the QoS function.
Strict
PQ: Strict priority queuing (Factory default setting)
Weighted
WRR: Weighted round robin scheduling
Round Robin
Displays the priority of packets.
Displays the weight to distribute packets.
115
Advertisement
Table of Contents
