Flying Key; Setting The Priority - Panasonic AV-UHS500P Operating Instructions Manual

Basic operations

Flying key

Using DVE effects, this key enables the key signals that have
been input to be moved, expanded or contracted.
In order for the flying key to take effect, select "SQ2: 8" as the
key transition.
 Refer to "Selecting the wipe pattern".
When the key transition is executed, the keys are combined
by the key signals set using the flying key menu.
(The transition effect is fixed at MIX.)
Since the flying key uses DVE effects, the image is delayed by
one frame.
1 Press the button to light its indicator, and display
KEY1
CKEY
the Key menu.
2 Use [F1] to display the Flying Key sub menu.
3 Use [F2] to set the X coordinate of the key signal using
the X-Pos item.
4 Use [F3] to set the Y coordinate of the key signal using
the Y-Pos item.
5 Use [F4] to set the key signal change size (max. 400:
400%) using the Size item.
ABC
Key signal
In order to add the edge of the key before the DVE effect,
the thickness of the edge is also changed when the size is
changed.
ABC
When combined using
the flying key
51
PinP combinations using the flying key
When "Full" is selected using the Type item in "Selecting the
key type", PinP combinations can be performed using the
flying key.
(At this point in time, the Clip item and Gain item cannot be
set on the Adjust sub menu.)
With the full key, the image on the full screen serves as the
key source signal so an edge will not be added unless a
further step is taken.
To add an edge, mask the key signals so that the key source
signals are made smaller than the entire screen.
 For details on masking, refer to "Masking the key signals".

Setting the priority

The relative positions of the images when Key1, Key2 and
Key3 images are to be superimposed onto one another can
be set.
1 Press the KEY1 button (or
CKEY
indicator, and display the Key menu.
2 Use [F1] to display the Key Priority sub menu.
3 Use [F2] to [F4] to set the relative positions using the
3rd item, 2nd item and 1st item.
1st This is used to set the image to be placed at
the top.
2nd This is used to set the image to be placed in
the middle.
3rd
This is used to set the image to be placed at
the bottom.
3rd:
Key1
2nd:
Key2
KEY2 button) to light its
KEY3
1st:
Key3