Toshiba e-STUDIO206L Service Manual page 1155

Sub
05/08 Mode Element
element
08 Setting Scanner RADF
mode
e-STUDIO206L/256/306/356/456/506
Item Subitem Code
3021
Sub- Default Acceptable
Details
code value value
Set for switchback- 0 0~1
mixed size copy
23
RAM Contents
SYS This setting is whether the original length is detected or
not by transporting without scanning in reverse when
A4-R/FOLIO paper or LT-R/LG paper is detected in a
mixed-size copying.
0: Disabled - AMS:
A series - Judges as A4-R without transporting in
reverse with no scanning.
LT series - Judges whether it is LT-R or LG by its
length
without transporting in reverse with no scanning.
APS:
A series - Judges whether it is A4-R or FOLIO without
transporting in reverse with no scanning.
LT series - Judges whether it is LT-R or LG without
transporting in reverse with no scanning.
1: Enable 1 AMS:
A series - Judges whether it is A4-R or FOLIO by
transporting without scanning in reverse to detect its
length.
LT series - Judges whether it is LT-R or LG by
transporting
without scanning in reverse to detect its length.
APS:
The same as that of APS in 0: Disabled.
Proc Service
edure UI
1 Yes