Clock Timezone - Dell S6100 Configuration Manual

Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
7.4.1.0
6.1.1.0
Related Commands
•
•
•

clock timezone

Configure a timezone for the switch.
Syntax clock timezone timezone-name offset
To delete a timezone configuration, use the no clock timezone command.
Parameters
timezone-name
offset
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
1602 System Time and Date
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Updated the start-day and end-day options to allow for using the three-letter
abbreviation of the weekday name.
Introduced on the E-Series.
ntp trusted-key — configures a trusted key.
clock summer-time date — sets a date (and time zone) on which to convert the switch to daylight saving time
on a one-time basis.
show clock — displays the current clock settings.
Enter the name of the timezone. You cannot use spaces.
Enter one of the following:
• a number from 1 to 23 as the number of hours in addition to universal time
coordinated (UTC) for the timezone.
• a minus sign (-) then a number from 1 to 23 as the number of hours.