Clock Summer-Time Recurring - Dell S6100 Configuration Manual

clock summer-time recurring

Set the software clock to convert to daylight saving time on a specific day each year.
Syntax clock summer-time time-zone recurring [start-week start-day start-month start-
time end-week end-day end-month end-time [offset]]
To delete a daylight saving time zone configuration, use the no clock summer-time command.
Parameters
time-zone
start-week
start-day
start-month
start-time
end-week
end-day
end-month
end-time
offset
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Enter the three-letter name for the time zone. This name is displayed in the show clock
output. You can enter up to eight characters.
(OPTIONAL) Enter one of the following as the week that daylight saving begins and then
enter values for start-day through end-time:
• week-number: Enter a number from 1 to 4 as the number of the week in the month
to start daylight saving time.
• first: Enter this keyword to start daylight saving time in the first week of the
month.
• last: Enter this keyword to start daylight saving time in the last week of the month.
Enter the name of the day that you want daylight saving time to begin. Use English three
letter abbreviations; for example, Sun, Sat, Mon, and so on. The range is from Sun to Sat.
Enter the name of one of the 12 months in English.
Enter the time in hours:minutes. For the hour variable, use the 24-hour format; example,
17:15 is 5:15 pm.
Enter the one of the following as the week that daylight saving ends:
• week-number: enter a number from 1 to 4 as the number of the week to end
daylight saving time.
• first: enter the keyword first to end daylight saving time in the first week of the
month.
• last: enter the keyword last to end daylight saving time in the last week of the
month.
Enter the weekday name that you want daylight saving time to end. Enter the weekdays
using the three letter abbreviations; for example Sun, Sat, Mon, and so on. The range is
from Sun to Sat.
Enter the name of one of the 12 months in English.
Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format;
example, 17:15:00 is 5:15 pm.
(OPTIONAL) Enter the number of minutes to add during the summer-time period. The
range is from 1 to 1440. The default is 60 minutes.
System Time and Date 1601