Clock Read-Calendar - Dell S4810 Reference Manual

Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
You can change the order of the month and day parameters to enter the time and
Information
date as time day month year.
In the switch, the hardware clock is separate from the software and is called the
calendar. This hardware clock runs continuously. After the hardware clock (the
calendar) is set, the Dell Networking OS automatically updates the software clock
after system bootup. You cannot delete the hardware clock (calendar).
To manually update the software with the hardware clock, use the clock read-
calendar command.
Example
Dell#calendar set 08:55:00 june 18 2006
Dell#
Related

clock read-calendar

Commands
show clock
clock read-calendar
Set the software clock on the switch from the information set in hardware clock (calendar).
S4810
Syntax
clock read-calendar
Defaults Not configured.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
System Time and Date
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— sets the software clock based on the hardware clock.
— displays the clock settings.
1645