Tray 1 Bottom Plate (Pl 6.1.42) - Xerox phaser 6250 Service Manual

Tray 1 Bottom Plate (PL 6.1.42)

1.
Remove the Chute Out Assembly (page 8-47).
2.
Remove the 2 screws securing the plate (item #1) to the Chute Out Assembly.
3.
Remove the left and right springs from the Tray 1 Shaft.
Note
In the following Steps, shift the actuator out of the hole in the Plate bottom
when removing the Plate.
4. Remove the Tray 1 Bottom Plate Assembly (item #2).
RIGHT
Reassembly Notes
.
Note
Ensure that Tray 1 Bottom Plate is properly seated on locator pins before
tightening the retaining screws, the locator pins are plastic and can be
damaged.
Service Parts Disassembly
1
manuals4you.com manuals4you.com
2
FRONT
LEFT
6250-192
8-61