REP 12.26 Brake Assembly
Parts List on PL 12.4
Removal
Switch off the power and disconnect the Power Cord.
1.
Remove the 2000 Sheet Feeder Tray Assembly (REP 12.7).
2.
Remove the two screws that secure the Brake Assembly to the Tray Assembly (Figure 1).
3.
Remove the Brake Assembly (Figure 1).
Figure 1 Brake Assembly
Replacement
1.
Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2025/N2825
WARNING
REP 12.27 Left Tray Wires
Parts List on PL 12.4
Removal
Switch off the power and disconnect the Power Cord.
1.
Remove the 2000 Sheet Feeder Tray Assembly (REP 12.7).
2.
Remove the Shaft Cover Assembly (REP 12.24).
3.
Remove the Brake Assembly (REP 12.26).
4.
Remove the Left Wire Cover (REP 12.23).
5.
Remove the E-ring that secures the 33 Gear (Figure 1). Remove the gear.
6.
Remove the Cable Pulley from the shaft (Figure 1).
7.
Remove the E-rings and pulleys from the two shafts on the tray assembly (Figure 1).
8.
Remove the wires down through the holes in the tray assembly (Figure 1).
Replacement
1.
Ensure the black plastic wire guides are at the top of the pulleys (Figure 1).
2.
Reinstall the components in the reverse order.
3.
The longer wire goes to the front of the tray.
02/2000
4-91
WARNING
Figure 1 Left Tray Wires
REP 12.26, REP 12.27
Repair-Adjustment