Auth-Web-Server Ping-Poll Failcount - Allied Telesis AT-IX5-28GPX Manual

A C
UTHENTICATION OMMANDS
- - -
AUTH WEB SERVER PING POLL FAILCOUNT

auth-web-server ping-poll failcount

Overview This command sets a fail count for the ping polling feature when used with
Web-Authentication. The failcount parameter specifies the number of
unanswered pings. A supplicant (client device) is logged off when the number of
unanswered pings are greater than the failcount set with this command.
Use the no variant of this command to resets the fail count for the ping polling
feature to the default (5 pings).
Syntax
auth-web-server ping-poll failcount <1-100>
no auth-web-server ping-poll failcount
Default The default failcount for ping polling is 5 pings.
Mode Global Configuration
Examples To set the failcount of ping polling to 10 pings, use the following commands:
awplus#
awplus(config)#
To set the failcount of ping polling to default, use the following commands:
awplus#
awplus(config)#
Validation show auth-web
Commands
show auth-web-server
show running-config
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter
<1-100>
configure terminal
auth-web-server ping-poll failcount 10
configure terminal
no auth-web-server ping-poll failcount
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
Count.
1095