Auth-Web-Server Ping-Poll Interval - Allied Telesis AT-IX5-28GPX Manual

A C
UTHENTICATION OMMANDS
- - -
AUTH WEB SERVER PING POLL INTERVAL

auth-web-server ping-poll interval

Overview This command is used to change the ping poll interval. The interval specifies the
time period between pings when the supplicant (client device) is reachable.
Use the no variant of this command to reset to the default period for ping polling
(30 seconds).
Syntax
auth-web-server ping-poll interval <1-65535>
no auth-web-server ping-poll interval
Default The interval for ping polling is 30 seconds by default.
Mode Global Configuration
Examples To set the interval of ping polling to 60 seconds, use the following commands:
awplus#
awplus(config)#
To set the interval of ping polling to the default (30 seconds), use the following
commands:
awplus#
awplus(config)#
Validation show auth-web
Commands
show auth-web-server
show running-config
1096 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter
<1-65535>
configure terminal
auth-web-server ping-poll interval 60
configure terminal
no auth-web-server ping-poll interval
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
Seconds.
C613-50057-01 REV A