Table of Contents
Advertisement
IP A
P
DDRESSING AND
ROTOCOL
-
ARP OPPORTUNISTIC
ND
arp opportunistic-nd
Overview
This command changes the behavior for unsolicited ARP packet forwarding on the
device.
Use this command to enable opportunistic neighbor discovery for the global ARP
cache.
Use the no variant of this command to disable opportunistic neighbor discovery
for the global ARP cache.
arp opportunistic-nd
Syntax
no arp opportunistic-nd
Default
Opportunistic neighbor discovery is disabled by default.
Mode
Global Configuration
Usage
When opportunistic neighbor discovery is enabled, the device will reply to any
received unsolicited ARP packets (but not gratuitous ARP packets). The source
MAC address for the unsolicited ARP packet is added to the ARP cache, so the
device forwards the ARP packet. When opportunistic neighbor discovery is
disabled, the source MAC address for the ARP packet is not added to the ARP
cache, so the ARP packet is not forwarded by the device.
Examples
To enable opportunistic neighbor discovery for the global ARP cache, enter:
awplus#
awplus(config)#
To disable opportunistic neighbor discovery for the global ARP cache, enter:
awplus#
awplus(config)#
Related
ipv6 opportunistic-nd
Commands
show arp
show running-config interface
C613-50103-01 REV A
C
OMMANDS
configure terminal
arp opportunistic-nd
configure terminal
no arp opportunistic-nd
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
666
Advertisement
Table of Contents
