Auth-Web-Server Ping-Poll Reauth-Timer-Refresh - Allied Telesis AT-IX5-28GPX Manual

A C
UTHENTICATION OMMANDS
- - -
AUTH WEB SERVER PING POLL REAUTH
auth-web-server ping-poll
reauth-timer-refresh
Overview This command modifies the reauth-timer-refresh parameter for the
Web-Authentication feature. The reauth-timer-refresh parameter specifies
whether a re-authentication timer is reset and when the response from a
supplicant (a client device) is received.
Use the no variant of this command to reset the reauth-timer-refresh parameter
to the default setting (disabled).
Syntax

auth-web-server ping-poll reauth-timer-refresh

no auth-web-server ping-poll reauth-timer-refresh
Default The reauth-timer-refresh parameter is disabled by default.
Mode Global Configuration
Examples To enable the reauth-timer-refresh timer, use the following commands:
awplus#
awplus(config)#
To disable the reauth-timer-refresh timer, use the following commands:
awplus#
awplus(config)#
reauth-timer-refresh
Validation show auth-web
Commands
show auth-web-server
show running-config
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
- -
TIMER REFRESH
configure terminal
auth-web-server ping-poll reauth-timer-refresh
configure terminal
no auth-web-server ping-poll
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
1097