Auth-Web-Server Ping-Poll Enable - Allied Telesis AT-IX5-28GPX Manual

A C
UTHENTICATION OMMANDS
- - -
AUTH WEB SERVER PING POLL ENABLE

auth-web-server ping-poll enable

Overview This command enables the ping polling to the supplicant (client device) that is
authenticated by Web-Authentication.
The no variant of this command disables the ping polling to the supplicant that is
authenticated by Web-Authentication.
Syntax
auth-web-server ping-poll enable
no auth-web-server ping-poll enable
Default The ping polling feature for Web-Authentication is disabled by default.
Mode Global Configuration
Examples To enable the ping polling feature for Web-Authentication, use the following
commands:
awplus#
awplus(config)#
To disable the ping polling feature for Web-Authentication, use the following
commands:
awplus#
awplus(config)#
Validation show auth-web
Commands
show auth-web-server
show running-config
1094 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
configure terminal
auth-web-server ping-poll enable
configure terminal
no auth-web-server ping-poll enable
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A