Show Gvrp Configuration - Allied Telesis x510-28GTX Command Reference Manual

GVRP C
OMMANDS

SHOW GVRP CONFIGURATION

show gvrp configuration
Overview Use this command to display GVRP configuration data for a switch.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show gvrp configuration
Mode User Exec and Privileged Exec
Example To show GVRP configuration for the switch, enter the command:
awplus#
Output The following is an output of this command displaying the GVRP configuration for
a switch:
awplus#show gvrp configuration
Global GVRP Configuration:
GVRP Feature: Enabled
Dynamic Vlan Creation: Disabled
Port based GVRP Configuration:
Port GVRP Status Registration
----------------------------------------------------------------
port1.0.1 Enabled
port1.0.2 Enabled
C613-50170-01 Rev B
show gvrp configuration
Applicant
Normal Normal
Normal Normal
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Timers(centiseconds)
Join Leave LeaveAll
20 60 1000
200 600 10000
"Getting Started
Guide.
762