Gvrp Registration - Allied Telesis AT-x510-28GTX Command Reference Manual

GVRP C
OMMANDS

GVRP REGISTRATION

gvrp registration
Overview Use this command to set GVRP registration to normal, fixed, and forbidden
registration modes.
Use the no variant of this command to disable GVRP registration.
Syntax gvrp registration {normal|fixed|forbidden}
no gvrp registration {normal|fixed|forbidden}
Mode Interface Configuration
Default Normal registration is the default.
Usage Configuring a trunk port in normal registration mode allows dynamic creation of
VLANs. Normal mode is the default mode. Validate using the
configuration
Configuring a trunk port in fixed registration mode allows manual creation of
VLANs.
Configuring a trunk port in forbidden registration mode prevents VLAN creation
on the port.
To configure GVRP registration to fixed on port1.0.1, enter the commands:
Examples
awplus#
awplus(config)#
awplus(config-if)#
To disable GVRP registration on interfaces port1.0.1, enter the commands:
awplus#
awplus(config)#
awplus(config-if)#
Validation show gvrp configuration
Commands
C613-50102-01 REV C
Parameter Description
normal
Specify dynamic GVRP registration and deregistration of VLANs.
fixed
Specify fixed GVRP registration and deregistration of VLANs.
forbidden
Specify no GVRP registration of VLANs. VLANs are deregistered.
command.
configure terminal
interface port1.0.1
configure terminal
interface port1.0.1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
gvrp registration fixed
no gvrp registration
show gvrp
678