NEC Univerge SV8100 Features And Specifications Manual page 320

Issue 1.0
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Caller ID
Conference
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
14-01-19 Basic Trunk Data Setup –
Privacy Mode Toggle Option
15-07-01 Programmable Function Keys
2 - 296
Description/Comments
Determine if a trunk should be able
to be toggled to a private/
non-private line (0 = Disabled,
1 = Enabled). This option is not
required for Voice Call Conference.
Use to assign functions to multiline
terminal line keys.
UNIVERGE SV8100
Assigned Data
0 = Disable Private
Line (Normal)
1 = Enable Private Line
(Private Line)
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Conference, Voice Call/Privacy Release
Level
1 2 3