Advertise-Interval; Object Missing; Authentication-Type - Dell Force10 Z9000 Reference Manual

Object Missing

This object is not available in the repository.

advertise-interval

Set the time interval between VRRP advertisements.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax advertise-interval seconds
To return to the default settings, use the no advertise-interval command.
Parameters
seconds
Defaults 1 second
Command Modes INTERFACE-VRRP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Usage Dell Force10 recommends keeping the default setting for this command. If you do change the
Information time interval between VRRP advertisements on one router, you must change it on all routers.

authentication-type

Enable authentication of VRRP data exchanges.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax authentication-type simple [encryption-type] password
To delete an authentication type and password, use the no authentication-type
command.
Parameters
simple
encryption-type
Enter a number of seconds. The range is 1 to 255. The default is 1
second.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword simple to specify simple authentication.
(OPTIONAL) Enter one of the following numbers:
• 0 (zero) specifies an un-encrypted authentication data will
follow.
• 7 (seven) specifies a hidden authentication data will follow.
• LINE is the un-encrypted (cleartext) authentication data.
1471