Ip Default-Gateway - Dell X1000 Series User Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm
If a configured IP address overlaps another configured one a warning message is
displayed. To change an existed IP address, delete the existed one and add the
new one.
Examples
Example 1 — The following example configures VLAN 1 with IP address
131.108.1.27 and subnet mask 255.255.255.0.
console(config)# interface vlan 1
ip address 131.108.1.27 255.255.255.0
console(config-if)#
Example 2 — The following example configures 3 overlapped IP addresses.
console(config)# interface vlan 1
console(config-if)# ip address 1.1.1.1 255.0.0.0
console(config)# exit
console(config)# interface vlan 2
console(config-if)# ip address 1.2.1.1 255.255.0.0
console(config)# This IP address overlaps IP address
1.1.1.1/8 on vlan1, are you sure? [Y/N]Y
console(config)# exit
console(config)# interface vlan 3
console(config-if)# ip address 1.3.1.1 255.255.0.0
console(config)# This IP address overlaps IP address
1.1.1.1/8 on vlan1, are you sure? [Y/N]Y
console(config)# exit

ip default-gateway

The ip default-gateway Global Configuration mode command defines a default
gateway (device). Use the no form of this command to restore the default
configuration.
Syntax
ip default-gateway ip-address
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
358
CLI