Show Ipv6 Bgp Network - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

show ipv6 bgp network

Displays the status of all the IPv6 BGP networks or a specific IPv6 BGP network.
show ipv6 bgp network [ipv6_address/prefix_length]
Syntax Definitions
ipv6_address
/prefix_length
Defaults
By default, all IPv6 BGP networks and their status will be displayed.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
Use the ipv6_address/prefix_length parameter to display the status of a specific IPv6 BGP nework.
Examples
show ipv6 bgp network
Network
------------------------------------+-----------+----------
2525:500:600::/64
show ipv6 bgp network 2525:500:600::/64
Network address
Network admin state
Network oper state
Network metric
Network local preference = 0,
Network community string = <none>
output definitions
Network or Network address
Admin state or Network admin
state
Oper state or Network oper
state
OmniSwitch CLI Reference Guide
The 128-bit IPv6 address.
The number of bits that are significant in the IPv6 address (mask)
(3..128).
Admin state Oper state
enabled
= 2525:500:600::/64,
= enabled,
= active,
= 0,
The IPv6 address configured for this local BGP network. This value is
configured through the
Indicates whether this local BGP network is administratively enabled
or disabled. This value is configured through the
ipv6 bgp network status
Indicates whether this BGP local network is operationally active or
inactive.
June 2012
active
ipv6 bgp network command.
command.
page 25-213