Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS MANUAL VOLUME 1 REV 2.3 Manual page 1696

XCHG—Exchange Register/Memory with Register (Continued)
IA-32_Intercept
Protected Mode Exceptions
#GP(0)
#SS(0)
#PF(fault-code)
#AC(0)
Real Address Mode Exceptions
#GP
#SS
Virtual 8086 Mode Exceptions
#GP(0)
#SS(0)
#PF(fault-code)
#AC(0)
4:394
Lock Intercept If an external atomic bus lock is required to
–
complete this operation and DCR.lc is 1, no atomic transaction
occurs, this instruction is faulted and an IA-32_Intercept(Lock) fault
is generated. The software lock handler is responsible for the
emulation of this instruction.
If either operand is in a nonwritable segment.
If a memory operand effective address is outside the CS, DS, ES, FS,
or GS segment limit.
If the DS, ES, FS, or GS register contains a null segment selector.
If a memory operand effective address is outside the SS segment
limit.
If a page fault occurs.
If alignment checking is enabled and an unaligned memory
reference is made while the current privilege level is 3.
If a memory operand effective address is outside the CS, DS, ES, FS,
or GS segment limit.
If a memory operand effective address is outside the SS segment
limit.
If a memory operand effective address is outside the CS, DS, ES, FS,
or GS segment limit.
If a memory operand effective address is outside the SS segment
limit.
If a page fault occurs.
If alignment checking is enabled and an unaligned memory
reference is made.
Volume 4: Base IA-32 Instruction Reference