Mpls Lsp No-Route Retries - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

Chapter 13: M Commands

mpls lsp no-route retries

mpls lsp no-route retries retryNum
Syntax
no mpls lsp no-route retries
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the number of attempts that will be made to set up an LSP for RSVP-TE
Description
after a failure due to no available route. The no version restores the default value, 0,
which means the attempts will be made until successful.
retryNum Number of retry attempts in the range 0–65535
Options
Global Configuration
Mode
1363
mpls lsp no-route retries