Receiver; Query-Response-Interval - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

query-response-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

receiver

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
query-response-interval seconds;
[edit logical-systems logical-system-name protocols igmp],
[edit protocols igmp]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify how long the querier router waits to receive a response to a host-query message
from a host.
—The query response interval must be less than the query interval.
seconds
Range: 1 through 1024
Default: 10 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Modifying the IGMP Query Response Interval
query-interval on page 2613
query-last-member-interval on page 2615
receiver {
source-vlans vlan-list;
install;
}
[edit protocols igmp-snooping vlan vlan-id | vlan-number data-forwarding]
Statement introduced in Junos OS Release 9.6 for EX Series switches.
Configure a VLAN as a multicast receiver VLAN of the multicast VLAN (MVLAN).
The remaining statements are explained separately.
Disabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 64
Example: Configuring Multicast VLAN Registration on EX Series Switches on page 2546
Configuring Multicast VLAN Registration (CLI Procedure) on page 2556
Chapter 85: Configuration Statements for IGMP Snooping and Multicast
2617