Relationship To Other Features - Alcatel OmniSwitch 6624 Network Configuration Manual

Static Link Aggregation Overview
See "Configuring Static Link Aggregation Groups" on page 10-7
Interface (CLI) commands to configure static aggregate groups and see
tion Configuration and Statistics" on page 10-16
groups.

Relationship to Other Features

Link aggregation groups are supported by other switch software features. The following features have CLI
commands or command parameters that support link aggregation:
VLANs. For more information on VLANs see
•
802.1Q. For more information on configuring and monitoring 802.1Q see
•
802.1Q."
Spanning Tree. For more information on Spanning Tree see
•
Parameters."
Note. See "Application Example" on page 10-14
features.
page 10-6
for information on using Command Line
for information on using CLI to monitor static aggregate
Chapter 4, "Configuring VLANs."
Chapter 5, "Configuring Spanning Tree
for tutorials on using link aggregation with other
OmniSwitch 6624/6648 Network Configuration Guide
Configuring Static Link Aggregation
"Displaying Static Link Aggrega-
Chapter 9, "Configuring
April 2004