Pre-Ride Inspection; Pre-Ride Inspection Check List - BRP can-am COMMANDER 2017 Series Operator's Manual

PRE-RIDE INSPECTION

Always inspect and confirm the safe operating condition of your vehicle prior to
ride. Always follow the maintenance schedule described in this Operator's Guide.
Perform a pre-ride inspection before each ride to detect any potential prob-
lem that could occur during operation. The pre-ride inspection can help you
monitor component wear and deterioration before they become a problem.
Correct any problem that you discover to reduce the risk of a breakdown or
crash. See an authorized Can-Am dealer as necessary.
Before using this vehicle, the operator should always perform the following

pre-ride inspection check list.

Pre-Ride Inspection Check List
What to Do Before Starting the Engine (Key OFF)
ITEMS TO BE
INSPECTED
Tires
Wheels
Radiator
Front grill kit
Engine oil
Coolant
Brake fluid
Engine air filter
CVT air filter
Drive shaft boots
_______
14
WARNING
INSPECTION TO PERFORM
Check tire pressure and condition.
– Front: MIN 69 kPa (10 PSI), LOADED 83 kPa (12 PSI)
– Rear: MIN 83 kPa (12 PSI), LOADED 152 kPa (22 PSI)
Check wheels for damage and for abnormal play, and
check lug nuts are tightened.
Check cleanliness of the radiator.
Inspect front grill kit for cleanliness.
Check engine oil level.
Check coolant level.
Check brake fluid level.
Inspect the engine air filter, replace if needed (service
more often when riding in dusty conditions).
Inspect and clean the CVT air filter (when riding in dusty
conditions).
Check drive shaft boots and protectors condition.
SAFETY INFORMATION
________
✔