Pre-Ride Inspection; Pre-Ride Inspection Check List - BRP CAN-AM OUTLANDER 6x6 2017 Series Operator's Manual

PRE-RIDE INSPECTION

Perform a pre-ride inspection before each ride to detect any potential prob-
lem that could occur during operation. The pre-ride inspection can help you
monitor component wear and deterioration before they become a problem.
Correct any problem that you discover to reduce the risk of a breakdown or
crash.
Before using this vehicle, the operator should always perform the following

pre-ride inspection check list.

Pre-Ride Inspection Check List
What to Do Before Starting the Engine (Key OFF)
ITEMS TO BE
INSPECTED
Engine oil
Coolant
Leaks
Throttle lever
Parking brake
Tires
Wheels
Radiator
Drive shaft boots
Seat
Cargo
Storage
compartment
_______
38
WARNING
INSPECTION TO PERFORM
Check engine oil level.
Check coolant level.
Check for any leaks under vehicle
Activate throttle lever several times to ensure it operates
freely. It must return to idle position when released
Apply parking brake and check if it operates properly
Check tire pressure and condition AS PER FOLLOWING
TABLE.
Check wheels for damage and for abnormal play. Check
that lug nuts are tightened.
Check cleanliness of the radiator
Check drive shaft boots and protectors condition
Check if operator seat is in place and properly latched
If you transport a cargo, respect the load capacity
Ensure cargo is properly secured to the racks
Check that the cargo bed release handle is locked by pin
If you are pulling a trailer or another equipment:
– Check hitch and trailer ball condition
– Respect the tongue capacity and towing capacity
– Ensure trailer is properly secured to hitch
Check if rear storage compartment is properly latched
SAFETY INFORMATION
________
✔