Removing And Installing Air Filter Housing - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
2.2 Removing and installing air filter hous‐
ing
Removing
– Release screws -1 and 3-.
– Unlock latch -arrow- and remove cover -2-.
– Expose coolant hose -2-.
– Unlock catches -arrows- and remove the air guide pipe top
-1-.
– Disconnect vacuum hose -1-.
– Loosen hose clamp -2- and remove air guide hose.
– Undo the air filter housing -3- from the rubber bolts and remove
it upwards.
Install
Note
Use a silicone-free lubricant for installing the air guide hose.
♦
Secure all hose connections with hose clamps which comply
♦
with the series design: ⇒ ETKA - electronic Catalogue of Orig‐
inal Parts .
– Check air guide hose (fresh air side) for salt deposits, dirt and
leaves.
– Check suction channel up to air filter insert for dirt.
– Install air filter housing.
Note
The water discharge hose must be laid straight and pointing
downwards, without any kinks.
288
Rep. gr.24 - Mixture preparation - injection