Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
47 –
Brakes - hydraulics
1
Front brake calipers
⇒ "1.1 Summary of components - front brake caliper", page 82
⇒ "1.2 Removing and installing brake caliper piston", page 83
1.1
Summary of components - front brake caliper
Note
Replace bolts / nuts that are tightened at an angle of rotation, as well as replacement components after
♦
removal.
Install the complete repair set when undertaking repairs.
♦
Use only methylated spirit for cleaning.
♦
Thinly coat brake cylinder, piston and gasket ring with lithium grease - G 052 150 A2- .
♦
1 - Dust cap
2 - Vent valve
❑ thinly coat thread with
lithium grease - G 052
150 A2- before screwing
in
❑ 10 Nm
3 - Screw
❑ Replace after disas‐
sembly
❑ 35 Nm
4 - Guide bolt
5 - Boot
❑ insert into the slot of the
brake carrier and of the
guide pin; grease the
slot first using grease
packing from the repair
kit
6 - Brake carrier
❑ is supplied as replace‐
ment part assembled
with guide pin and pro‐
tective caps as well as
adequate quantity of
grease on guide pins
❑ if there is any damage to
the protective caps or
guide bolts fit a repair
set (use the enclosed
grease packing to lubri‐
cate the guide bolts)
7 - Boot
❑ Removing and installing
⇒ "1.2 Removing and installing brake caliper piston", page 83
❑ do not damage when inserting the piston
82
Rep. gr.47 - Brakes - hydraulics