20
¡ ¢ £
------------
------------
Fuel Supply System
K -
Pay attention to installation position:
♦ Marking on the flange should be aligned
with the marking on the fuel tank -arrows-.
♦ Blue return flow pipe -1- to connection
with marking -R-.
♦ Black feed pipe -2- to connection with
marking -V-.
Removing and installing fuel gauge
sender
Removing
-
Remove fuel delivery unit ⇒ page 20-5.
K -
Release connector tabs of cables -3- and -4-
and unplug.
-
Use a screwdriver to lift the retaining tabs
-1- and -2- and pull fuel gauge sender down
and off -arrow-.
Installing
-
Insert fuel gauge sender into the guides at
the fuel delivery unit and push up until it locks
in place.
Removing and installing fuel tank
Pay attention to safety precautions
⇒ page 20-4.
Pay attention to rules for cleanliness ⇒ page
20-4
Special tools, testers and aids required
♦ Engine/gearbox jack (e.g. V.A.G 1383 A)
♦ Fuel extraction unit (e.g. V.A.G 1433 A)
OCTAVIA
Edition 08.96
S00.5104.50.20