Removing And Installing, Setting Angular Clutch Pedal Switch F36 - Skoda Fabia II 2007 Workshop Manual

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
13 - 28 Nm
❑ always replace ⇒ Electronic Catalogue of Original Parts
14 - Master cylinder
❑ removing and installing
❑ test tightness ⇒ page 57
15 - Spring strap clamp
16 - Supply hose
❑ out of rubber
❑ as of 12.05 on certain vehicles out of plastic
❑ if the return hose is made out of plastic, do not use hose clamp - MP7-602-
❑ test tightness ⇒ page 57
17 - Bearings
❑ insert in bearing bracket
❑ always replace ⇒ Electronic Catalogue of Original Parts
18 - Screw
❑ Pedal stop on bracket -Pos. 3-
19 - Pedal stop
❑ screw with screw -Pos. 18- onto bracket -Pos. 3-
20 - 25 Nm
❑ always replace ⇒ Electronic Catalogue of Original Parts
Difference between clutch pedal switch -F36-
♦ -A- Switch with angular housing
Removing and installing
♦ -B- Switch with cylindrical housing
Removing and installing
1.2 Removing and installing, setting angular
clutch pedal switch - F36- , (Fabia II
2007 ►; Roomster 2006 ►)
Note
The clutch pedal switch - F36- may only be installed once to en‐
sure that it has an adequately tight fit in the bracket.
20
Rep. gr.30 - Clutch
⇒ page 58
⇒ page 20
⇒ page 21
⇒ page 54