Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
10 –
Removing and installing engine
1
Removing and installing engine
⇒ "1.1 Remove - (Octavia III)", page 10
⇒ "1.2 Removing - (Yeti)", page 18
⇒ "1.3 Securing the engine to the assembly stand", page 25
⇒ "1.4 Installing - (Octavia III)", page 26
⇒ "1.5 Installing - (Yeti)", page 29
1.1
Remove - (Octavia III)
Special tools and workshop equipment required
♦ Removal tool for inner lining of the door panel - MP8-602/1-
♦ Extending the lifting device - MP9-201 (2024A)-
♦ Engine/gearbox jack - V.A.G 1383 A-
♦ Engine mount - T10497-
♦ Catch pan , e.g. -VAS 6208-
♦ Hose clip pliers, e.g. - VAS 6362-
♦ Locking pin - T10060 A-
♦ Double ladder , e. g. -VAS 5085-
♦ Grease - G 000 100-
♦ Protective goggles
♦ Protective gloves
Work procedure
Note
The engine is removed downwards together with the gearbox.
♦
All cable straps that have been loosened or cut open when the
♦
engine was removed must be attached again in the same lo‐
cation when the engine is installed again.
Leave the ignition key in the ignition lock so that the steering
♦
lock does not click into place.
Collect drained coolant in a clean container for reuse or proper
♦
disposal.
10
Rep. gr.10 - Removing and installing engine