Installing And Removing Radiator Fans V7 And V177; Removing And Installing Radiator Fan For Coolant - Skoda Octavia III 2013 Workshop Manual

4.5 Installing and removing radiator fans -
V7- and -V177-
Removing
Note
All cable straps should be fitted on again in the same place when
installing.
– Removing fan shroud
– Disconnect plug connection -arrow-.
– Remove screws -1- and remove the radiator fan - V7- .
– Remove screws -2- and remove the radiator fan - V177- .
Install
Installation is carried out in the reverse order. However, pay at‐
tention to the following:
• Tightening torques ⇒ page 212
– Install fan shroud ⇒ page 215
4.6 Removing and installing radiator fan for
coolant
Removing
– Drain coolant ⇒ page 182
– Removing fan shroud
– Remove front bumper ⇒ Body Work; Rep. gr. 63 .
– Release screws -1, 3-.
– Unlock latch -arrow- and remove cover -2-.
– Expose coolant hose -2-.
– Unlock catches -arrows- and remove the air guide pipe top
-1-.
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
⇒ page 215 .
.
.
⇒ page 215 .
Octavia III 2013 ➤ , Octavia III 2014 ➤
4. Radiator and radiator fan
213