cap with cloths and open carefully.
Inspect coolant level. When engine is at
operating temperature the coolant level
–
must be at the maximum marking, when
engine is cold between the minimum and
the maximum markings.
Removing and installing radiator
Note
t
Always replace seals and gasket rings.
t
Raise vehicle with the lift platform
Special tools and workshop equipment required
t
Torque wrench 5 to 50 Nm (e.g. -V.A.G 1331-)
Removing
–
Drain coolant
Unplug connector -1- from thermoswitch
–
-F18- and separate plug connections -2-
and -3- at fan shroud (press catches).
Separate coolant hoses at connection
–
fittings of radiator (pull off retaining clip).
Vehicles with air conditioning
→
→
Chapter.
Chapter.
98