Removing And Installing Oil Pan - Skoda Fabia III 2015 Workshop Manual

Fabia III 2015 ➤, Kamiq 2019 ➤, Karoq 2018 ➤, Karoq 2020 ➤, Octavia III 2013 ➤, ...
– At the same time, tighten the nut on the gear shift lever -1-.
• When tightening the nut, at the same time, ensure that the
slider -3- in the valve body, in which the gearshift lever en‐
gages, is not damaged.
– Bend locking plate and thus secure the nut -arrow-.
– Install oil filter ⇒ a1.5 nd installing the oil filter", page 217
– Installing the oil pan
– Top up with ATF, inspect ATF level
23 .
Tightening torques and summaries of components
Note
Replace bolts / nuts that are tightened at an angle of rotation,
as well as replacement components after removal.
⇒ o1.1 f components - slide valve body", page 206
1.4

Removing and installing oil pan

Special tools and workshop equipment required
⇒ a1.4 nd installing oil pan", page 215
⇒ A2.1 TF level", page
Automatic gearbox 09G - Edition 02.2021
.
.
215
1. Slide valve body