Table of Contents
Advertisement
The Setup option allows you to set your IRM2 Device Name, IP Address,
SubNet Mask, Default Gateway, modem baud rate, current date and time,
security mode (locked or unlocked), statistical counters refresh time, and
enable or disable the factory default settings.
The IRM2 saves all of these options in the battery backup memory when
you power down, except for the factory default settings which always
default to DISABLED on power up.
5.1
SETUP SCREEN
To access the Setup Option:
1. Use the arrow keys to highlight the SETUP option at the bottom of the
DEVICE/BOARD/PORT COUNTERS screen.
2. Press Return. The Setup Screen, Figure 5-1, appears.
11/02/92
Device Name: IRM2
Set IP Address:
Set SubNet Mask:
Set Default Gateway:
Set Current Date:
Set Current Time:
Set Modem Baud Rate:
Set Device Lock:
Set Refresh:
Factory Defaults:
CHAPTER 5
USING THE SETUP OPTION
DEVICE/BOARD/PORT COUNTERS
RETURN
Figure 5-1 Setup Screen
Ethernet Address: 00-00-1d-00-39-14
IP Address: 132.177.118.24
132.177.118.24
0.0.0.0
0.0.0.0
11/02/92
07:40:18
2400
UNLOCKED
18
DISABLED
SAVE SETUP
5-1
Advertisement
Table of Contents
