Table of Contents
Advertisement
The configuration tree uses the icons described in the following table to represent
configuration tree objects, to indicate that there is a wizard or dialog box associated with
an object, and to identify configuration file changes and errors:
Icon
Represents a configuration file or configurable object, such as an interface,
VLAN, QoS policy, ACL, and so on.
Double-clicking an object's folder icon displays the contents of that object.
Represents a chassis module.
Double-clicking a module icon displays that module's ports. However, this is
not the case with the Control Module icon because there are no ports
associated with the Control Module.
Represents a port.
Indicates that a dialog box is associated with an object. You can configure the
object by using its dialog box.
Indicates that a wizard is associated with an object. You can configure the
object by using its wizard.
Identifies either configuration file changes or errors.
•
Blue indicators identify new or modified objects.
•
Red indicators identify those objects that are not configured properly.
These indicators appear only after you commit your changes to the Active
configuration file.
You can configure objects through wizards and dialog boxes, which are forms that prompt
you for the appropriate configuration information.
Wizards take you step-by-step through the process of adding objects that are complex to
configure. If you add an object using a wizard, there will be a wizard icon
object.
Description
next to that
Advertisement
Table of Contents
