Table of Contents
Advertisement
Using the FRX4000, FRX6000, and SmartSwitch 1800 Hub View
Receive Error Ratio
Transmit Percent Utilization
Receive Percent Utilization
Managing the Hub
In addition to the performance information described in the preceding sections,
the Hub View also provides you with the tools you need to conÞgure your device
and keep it operating properly. Hub management functions include setting the
polling intervals, and enabling and disabling serial ports.
Setting the Polling Intervals
To set the polling intervals used by SPMA and the FRX:
1. Click on
2. Drag down to Polling Intervals, and release.
3. To activate the desired polling, click mouse button 1 on the selection box to
2-32
to display the Device menu.
Figure 2-17. FRX Hub View Polling Intervals
the right of each polling type field.
Shows the threshold for the Receive Error
Ratio statistic. This statistic is the ratio of
frames rejected per second to frames
accepted per second on the port.
Shows the threshold for the Tx Utilization %
statistic.
Shows the threshold for the Rx Utilization %
statistic.
Managing the Hub
Advertisement
Table of Contents
