Table of Contents
Advertisement
USER'S GUIDE
Use the following default values for your communication package:
Baud rate
Parity
Data bits
Stop bits
Duplex
2.
You should then have a connection to the module or CyberSWITCH. You will be prompted for
a login ID and the initial password. Enter admin for both.
3.
You will now see the system prompt. We recommend that you select a new password. To do
this, enter the following command at the system prompt then follow the onscreen directions:
pswd
4.
To assign the module's new IP address, enter the following command at the system prompt:
ipconfig
Then as prompted, enter:
•
the system's IP address
•
the required subnet mask
•
for the system's default route, enter the IP address of the system's default gateway (enter
0 if there is no default route)
Follow the instructions to restart the module so that the configuration changes will take effect.
5.
Using SFVRA-CFG, configure the system's or module's configuration information.
6.
Generate then download the configuration files from the SFVRA-CFG to the new system.
Instructions for generating and downloading configuration files are located in
Configuration
7.
When the download is complete, the system will automatically restart, making the
configuration changes permanent.
8.
The new system should now be configured and ready to be placed at its remote site. Remove
the system from the LAN.
9.
Repeat the above steps for each system.
U
E
PDATES FOR AN
STABLISHED
Once you have an established network, you can use the SFVRA-CFG application to centrally
update a system's configuration database files, then generate and download the updated
configuration files from the SFVRA-CFG to the system. Instructions for generating and
downloading configuration files are located in
C
U
F
OPYING
PDATED
At times you may find it necessary to copy (as opposed to download) updated configuration files.
For example, if a remote system's configuration files somehow become corrupted, you may not be
30
SFVRA Configuration Manager
9600
None
8
1
Full
Files.
N
ETWORK
ILES
Exporting Configuration
Files.
Exporting
Advertisement
Table of Contents
