Table of Contents
Advertisement
Chapter 15: Configuring BGP on the SSR
17. Use the Add Networks to BGP panel that appears to add peer networks to the BGP:
18. Specify whether to add all associated networks or a specific network to the BGP by
selecting either the All Networks or IP Network/Host option.
19. If you selected the IP Network/Host option in
mask for the network interface in the appropriate text boxes.
20. If you wish to add another individual network to the BGP, check the Add More
Networks option, click Next, and repeat
of the networks you wish to add to the BGP.
21. Click Finish.
The BGP wizard closes and an object representing your newly-defined network
information appears in the Configuration Expert configuration tree under BGP
Groups.
Modifying an Existing BGP Peer Group
There will probably come a time when you find it necessary to update your peer group
information to include new or relocated associated hosts or networks, and/or delete
outdated hosts or networks.
To modify an existing peer group:
1.
Start Configuration Expert if you have not already done so.
288
Figure 190. Add Network to BGP Group panel
step
18, enter the IP address and subnet
step 18
and
step 19
until you have specified all
CoreWatch User's Manual
Advertisement
Table of Contents
