Deleting An Snmp User - Siemens RUGGEDCOM ROS User Manual

Hide thumbs Also See for RUGGEDCOM ROS:
Table of Contents

Advertisement

Chapter 5
Setup and Configuration
Parameter
v1/v2c Community
Auth Protocol
Priv Protocol
Auth Key
Confirm Auth Key
Priv Key
Confirm Priv Key
4.
Click Apply.
Section 5.7.1.3

Deleting an SNMP User

To delete an SNMP user, do the following:
Navigate to Administration » Configure SNMP » Configure SNMP Users. The SNMP Users table
1.
appears.
186
Description
user, but from any other IP address.If IP address is empty, traps can not be generated to
this user, but SNMP requests will be served for this user from any IP address.
Synopsis: Any 32 characters
The community string which is mapped by this user/security name to the security group
if security model is SNMPv1 or SNMPv2c. If this string is left empty, it will be assumed to
be equal to the same as user name.
Synopsis: { noAuth, HMACMD5 }
Default: noAuth
An indication of whether messages sent on behalf of this user to/from SNMP engine,
can be authenticated, and if so, the type of authentication protocol which is used.
Synopsis: { noPriv, CBC-DES }
Default: noPriv
An Indication of whether messages sent on behalf of this user to/from SNMP engine can
be protected from disclosure, and if so, the type of privacy protocol which is used.
Synopsis: 31 character ASCII string
The secret authentication key (password) that must be shared with SNMP client. If the
key is not an emtpy string, it must be at least 6 characters long.
Synopsis: 31 character ASCII string
The secret authentication key (password) that must be shared with SNMP client. If the
key is not an emtpy string, it must be at least 6 characters long.
Synopsis: 31 character ASCII string
The secret encription key (password) that must be shared with SNMP client. If the key is
not an emtpy string, it must be at least 6 characters long.
Synopsis: 31 character ASCII string
The secret encription key (password) that must be shared with SNMP client. If the key is
not an emtpy string, it must be at least 6 characters long.
RUGGEDCOM ROS
User Guide
Deleting an SNMP User

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents