Mitel SX-200 Practices page 1165

m .
DATASm 1100 Series Description
SlJPERSET4277, OR
SUPERST430
TELEPHONE
MUNKDATA MODULE
EEm
Figure 14-7 MiLink Data Module Installation
Power Supplies
14. IO The DATASET 1101 Cartridge, the Standalone DATASET II 03, and the /UW& Data
Module ail receive their power from a plug-in transformer which supplies 9 Vat to a
power connector on the back of the set. Circuitry within the dataset converts this to
the required dc voltages. The digital telephone set voice operation receives its power
from the PABX, whether or not the DATASET 1101 Cartridge power supply is plugged
in. However, if the power supply is not plugged in, DATASET 1101 Cartridge
operation is not possible.
The DATASET 1102 Dual Rack Mounted card receives its power from a power supply
which is an integral part of the DATASHELF 9100. Refer to DATACABINET 9000 and
to DATASHELF 9100 in this Practice.
9109-696-126-NA Issue 1
Revision 0
126 14-15